About Test
About Grain Zoomer Test
This is a dry blood spot (DBS) collection that is done at home.
You will receive a kit with full instructions. When you receive your kit please open it up and lay out the instructions and contents of your kit and get familiar with them.
You will be sent a lancet (to prick your finger with), as well as a blood specimen collection card. Simply follow the instructions to 'fill' your card with blood spots.
View detailed collection instructions with images here (PDF)
STEP 1
Before you begin, make sure you will have at least 15 minutes of uninterrupted time. First, find a clean, open space to work on. Open the DBS collection kit and lay out all of your materials on the placemat (the last page) provided.
Please wear appropriate PPE ( personal protective equipment) while collecting the specimen from the patient.
* You will be given as many Blood specimen collection cards as required by your lab order.
* All DBS cards need to be filled for testing. Failure to complete all cards will result in the test not being performed.
STEP 2
Write the name and DOB on the card. Write the date and time on the blood specimen collection card.
STEP 3
Open the alcohol wipe.
STEP 4
Wash your hands and dry them with a clean towel. Make sure the water is warm, not hot.
This is very important as it will stimulate blood flow to the hands!
STEP 5
Choose a finger to poke on your non-dominant hand. If you are left-handed, choose your right hand. If you are right-handed, choose your left hand.
STEP 6
Choose an area on the side of your finger to poke (you'll see a visual in the instructions).
STEP 7
Pick up your lancet and twist the cap off.
STEP 8
Rub your finger from base to tip.
STEP 9
Put the lancet down and wipe the tip of your finger with the alcohol wipe.
Make sure to only wipe the finger in one single swoop!
STEP 10
With your palm facing up, press the lancet to your finger until you hear a click and feel a slight pinch.
STEP 11
Wipe the first drop of blood away with a gauze pad.
STEP 12
Milk your finger from base to tip to produce more blood.
STEP 14
Let the blood drop fall from your fingertip into the collection circle.
DO NOT touch your finger to the card. Fill the circle as full as possible, but do not add a second drop of blood to a circle. If necessary, use a second lancet!
STEP 15
After filling in all of the collection card circles, use your gauze pad to wipe the blood, apply pressure and apply a bandage.
STEP 16
Please discard the bio waste, including used lancet, alcohol pads, and gauze sponge, in an appropriate Biohazard waste container.
STEP 17
Let your collection card sit for at least 2 hours to dry before sending it back to us.
Keep the collection card in a cool, dry place away from sunlight.
Do not add additional blood drops after blood spots have dried.
Blood spots will darken as they dry.
STEP 18
After the blood spots have dried for at least 2 hours, fold the collection card, place it in the biohazard bag along with the humidity indicator and silica gel packs, and seal it tight.
STEP 19
Place the biohazard bag into the bubble mailer. Wash hands to prevent contamination. Please schedule Fedex Pick up for the specimen to be picked up from your office.
The Vibrant Experience
Vibrant America is a leading science and technology company delivering life-transforming laboratory services using an integrated microarray platform that enables multiplex testing at an affordable cost.
Vibrant’s relationship with its patients and providers is special. We go out of our way to provide the value and resources our providers need to accurately interpret test results and give patients the most accurate health information.
The Most Accurate In the Industry
All tests run on Vibrant’s proprietary 3Dense microchip technology platform boast an unrivaled specificity and sensitivity – which translates to the highest standard of accuracy of results in the lab industry.
Our Lab Technology
Vibrant America is at the forefront of modern medicine. Our technology was developed out of passion for better medicine, and we believe that automation is the key to high-quality and accurate test results. Multiplexing tests on a single sample enable a fast turnaround time.
Our Mission
Dedicated to bring clinically relevant test at a rapid pace to enable affordable high-quality diagnostics to every individual.
- High-quality lab service
- Fully automated systems
- Low cost
- Fast Turn Around Time
Quality and Security
All of our laboratory testings is done in a CLIA and CAP-certified laboratory in California.
Vibrant America's Compliance Overview
FAQ
FAQ
How do I know if my blood spots are big enough?
You’ll know if you have enough blood if the blood spot fills most of the collection circle. Try your best to fill all five circles.
My blood drops fell outside of the collection circles. Is this okay?
Yes, it is fine if the blood drops don’t fit neatly into the circles, but try to get them as close as possible.
I am nervous to poke my finger. What should I do?
Most people have said that the anticipation is worse than the poke itself. It should only feel like a slight “pinch.”
I poked my finger but am not getting enough blood out. What should I do?
First, try standing up and milking your finger below your waist. You can also try shaking your hand below your waist. If that doesn’t help, you can run your fingers under warm water while milking them to stimulate blood flow.
If blood still isn’t flowing, it has probably clotted. Wipe your finger with the alcohol wipe and apply a bandage. Try again later. It may help to take a break and drink a glass of water and move around. This will help stimulate blood flow to your fingers. Then, try again. This time poke another finger or a different spot on the same finger, and then try the process again.
